A precision gap-setting tool for all massive-electrode Champion sparkplugs. Permits simultaneous adjustment of two opposite prongs without removing the spacing gauge. Designed for permanent installation on bench or heavy wooden board.
Four prong "N" and two-prong "E" Aviation spark plugs are easily adjusted using the Model 2500 Gap Setting Tool. Since this tool adjusts two prongs simultaneously, it is particularly adaptable to high volume gap setting requirements.
Accessories Packaged in Model 2500A Gap Setting Tool:
10 pcs - GT-1-17L Spacing Gauge (.015"-.019"/.40-.50mm)
1 Pc - GT-1-27 Spacing Gauge Handle Assembly
1 PC - CT-458-2 Lever
1 PC - CT458-3 - Toggle Link
1 PC - CT458-4 - Toggle Arm
1 PC - CT458-5 - Toggle Pin
1 PC - CT458-6 - Stationary Finger
1 PC - CT458-7 Stationary Finger Support
1 PC - CT458-10 - Upper Collet Bushing
1 PC - CT458-11 - Centering Bushing
1 PC - CT458-12 - Collet Adjustment Bushing
1 PC - CT458-13 - Spring Pin
1 PC - CT458-15 - Finger Pin
*Spares of the above part numbers are also sold separately in the event they are lost or misplaced.*
Maintenance:
Like all shop tools, the Champion Model 2500 Gap Setting Tool requires a minimum of shop maintenance. It should be kept clean and lubricated periodically for most efficient operation. Adjusting level should be lubricated with a light machine oil. The upper collet bushing and frame collet bearing surface should be cleaned and libricated with a light grease of Champion's thread lubricant (Part number 2612) as necessary. Most important, the collet should float freely in the frame at all times.**
Please refer to the following installation guide for a general overview of tool assembly and unboxing. Please refer to your champion manuals for verification of gapping.
Isolation Mount Installation Tool for TM10 / UT10 / HT0 / UT0 Mounts
The 5675-10 T-Mount Spanner Wrench is a precision tool designed for installing and removing avionics isolation mounts that utilize drill-rod hole core designs. This mount-specific spanner allows technicians to securely hold the mount core while applying torque, preventing core spin during installation or removal.
Unlike traditional drill-rod methods, the 5675-10 spanner provides a stable and repeatable anti-rotation interface, helping reduce the risk of damage to mount cores, threads, and protective coatings during avionics maintenance procedures.
The spanner head is engineered with a pin size and arc geometry matched to the mount’s drill-rod hole diameter, ensuring proper engagement and safe installation.
Key Features
• Designed specifically for avionics isolation mounts with drill-rod hole cores• Prevents core spin during torque installation• Helps protect mount threads, coatings, and core holes• Enables repeatable torque application during installation• Allows 180° rotation for quick removal and installation• Precision matched to the mount core geometry
Compatible Mount Series
The 5675-10 spanner is designed for use with the following isolation mount families:
TM10
UT10
HT0
UT0
These mounts are commonly used in avionics tray installations and LRU mounting systems within aircraft avionics equipment.
Typical Applications
• Aircraft avionics tray installations• LRU mounting systems• Isolation mount installation and removal• Aircraft maintenance, repair, and overhaul (MRO)• Avionics equipment servicing
Specifications
Tool Model: 5675-10Mount Compatibility: TM10, UT10, HT0, UT0Application: Avionics isolation mount installation and removalManufacturer: ACE Technical Plastics
Available Mount Sizes
This spanner is part of the 5675 T-Mount Spanner Series, which includes tools for multiple mount sizes including:
5675-11
5675-12
5675-22
5675-44
5675-64
5675-94
Isolation Mount Installation Tool for TM11 / UT11 / HT1 / UT1 Mounts
The 5675-11 T-Mount Spanner Wrench is a precision tool designed for installing and removing avionics isolation mounts that utilize drill-rod hole core designs. This mount-specific spanner allows technicians to securely hold the mount core while applying torque, preventing core spin during installation or removal.
Unlike traditional drill-rod methods, the 5675-11 spanner provides a stable and repeatable anti-rotation interface, helping reduce the risk of damage to mount cores, threads, and protective coatings during avionics maintenance procedures.
The spanner head is engineered with a pin size and arc geometry matched to the mount’s drill-rod hole diameter, ensuring proper engagement and safe installation.
Key Features
• Designed specifically for avionics isolation mounts with drill-rod hole cores• Prevents core spin during torque installation• Helps protect mount threads, coatings, and core holes• Enables repeatable torque application during installation• Allows 180° rotation for quick removal and installation• Precision matched to the mount core geometry
Compatible Mount Series
The 5675-11 spanner is designed for use with the following isolation mount families:
TM11
UT11
HT1
UT1
These mounts are commonly used in avionics tray installations and LRU mounting systems within aircraft avionics equipment.
Typical Applications
• Aircraft avionics tray installations• LRU mounting systems• Isolation mount installation and removal• Aircraft maintenance, repair, and overhaul (MRO)• Avionics equipment servicing
Specifications
Tool Model: 5675-11Mount Compatibility: TM11, UT11, HT1, UT1Application: Avionics isolation mount installation and removal
Available Mount Sizes
This spanner is part of the 5675 T-Mount Spanner Series, which includes tools for multiple mount sizes including:
5675-10
5675-12
5675-22
5675-44
5675-64
5675-94
Isolation Mount Installation Tool for HT2 / UT2 Mounts
The 5675-12 T-Mount Spanner Wrench is a precision tool designed for installing and removing avionics isolation mounts that utilize drill-rod hole core designs. This mount-specific spanner allows technicians to securely hold the mount core while applying torque, preventing core spin during installation or removal.
Unlike traditional drill-rod methods, the 5675-12 spanner provides a stable and repeatable anti-rotation interface, helping reduce the risk of damage to mount cores, threads, and protective coatings during avionics maintenance procedures.
The spanner head is engineered with a pin size and arc geometry matched to the mount’s drill-rod hole diameter, ensuring proper engagement and safe installation.
Key Features
• Designed specifically for avionics isolation mounts with drill-rod hole cores• Prevents core spin during torque installation• Helps protect mount threads, coatings, and core holes• Enables repeatable torque application during installation• Allows 180° rotation for quick removal and installation• Precision matched to the mount core geometry
Compatible Mount Series
The 5675-12 spanner is designed for use with the following isolation mount families:
HT2
UT2
These mounts are commonly used in avionics tray installations and LRU mounting systems within aircraft avionics equipment.
Typical Applications
• Aircraft avionics tray installations• LRU mounting systems• Isolation mount installation and removal• Aircraft maintenance, repair, and overhaul (MRO)• Avionics equipment servicing
Specifications
Tool Model: 5675-12Mount Compatibility: HT2, UT2Application: Avionics isolation mount installation and removal
Available Mount Sizes
This spanner is part of the 5675 T-Mount Spanner Series, which includes tools for multiple mount sizes including:
5675-10
5675-11
5675-22
5675-44
5675-64
5675-94
Isolation Mount Installation Tool for T22 / TM22 / UTM22 / 1766 / 50722 Mounts
The 5675-22 T-Mount Spanner Wrench is a precision tool designed for installing and removing avionics isolation mounts that utilize drill-rod hole core designs. This mount-specific spanner allows technicians to securely hold the mount core while applying torque, preventing core spin during installation or removal.
Unlike traditional drill-rod methods, the 5675-22 spanner provides a stable and repeatable anti-rotation interface, helping reduce the risk of damage to mount cores, threads, and protective coatings during avionics maintenance procedures.
The spanner head is engineered with a pin size and arc geometry matched to the mount’s drill-rod hole diameter, ensuring proper engagement and safe installation.
Key Features
• Designed specifically for avionics isolation mounts with drill-rod hole cores• Prevents core spin during torque installation• Helps protect mount threads, coatings, and core holes• Enables repeatable torque application during installation• Allows 180° rotation for quick removal and installation• Precision matched to the mount core geometry
Compatible Mount Series
The 5675-22 spanner is designed for use with the following isolation mount families:
T22
TM22
UM22
1766 Series
50722 Series
These mounts are commonly used in aircraft avionics tray installations and LRU mounting systems.
Typical Applications
• Aircraft avionics tray installations• LRU mounting systems• Isolation mount installation and removal• Aircraft maintenance, repair, and overhaul (MRO)• Avionics equipment servicing
Specifications
Tool Model: 5675-22Mount Compatibility: T22, TM22, UM22, 1766, 50722Application: Avionics isolation mount installation and removalManufacturer: Molding Technologies
Available Mount Sizes
This spanner is part of the 5675 T-Mount Spanner Series, which includes tools for multiple mount sizes including:
5675-10
5675-11
5675-12
5675-44
5675-64
5675-94
Isolation Mount Installation Tool for T44 / TM44 / UTM44 / 1766 / 50744 Mounts
The 5675-44 T-Mount Spanner Wrench is a precision tool designed for installing and removing avionics isolation mounts that utilize drill-rod hole core designs. This mount-specific spanner allows technicians to securely hold the mount core while applying torque, preventing core spin during installation or removal.
Unlike traditional drill-rod methods, the 5675-44 spanner provides a stable and repeatable anti-rotation interface, helping reduce the risk of damage to mount cores, threads, and protective coatings during avionics maintenance procedures.
The spanner head is engineered with a pin size and arc geometry matched to the mount’s drill-rod hole diameter, ensuring proper engagement and safe installation.
Key Features
• Designed specifically for avionics isolation mounts with drill-rod hole cores• Prevents core spin during torque installation• Helps protect mount threads, coatings, and core holes• Enables repeatable torque application during installation• Allows 180° rotation for quick removal and installation• Precision matched to the mount core geometry
Compatible Mount Series
The 5675-44 spanner is designed for use with the following isolation mount families:
T44
TM44
UTM44
1766 Series
50744 Series
These mounts are commonly used in aircraft avionics tray installations and LRU mounting systems.
Typical Applications
• Aircraft avionics tray installations• LRU mounting systems• Isolation mount installation and removal• Aircraft maintenance, repair, and overhaul (MRO)• Avionics equipment servicing
Specifications
Tool Model: 5675-44Mount Compatibility: T44, TM44, UTM44, 1766, 50744Application: Avionics isolation mount installation and removalManufacturer: Molding Technologies
Available Mount Sizes
This spanner is part of the 5675 T-Mount Spanner Series, which includes tools for multiple mount sizes including:
5675-10
5675-11
5675-12
5675-22
5675-64
5675-94
Isolation Mount Installation Tool for T64 / TM64 / UTM64 / 1769 / 50764 Mounts
The 5675-64 T-Mount Spanner Wrench is a precision tool designed for installing and removing avionics isolation mounts that utilize drill-rod hole core designs. This mount-specific spanner allows technicians to securely hold the mount core while applying torque, preventing core spin during installation or removal.
Unlike traditional drill-rod methods, the 5675-64 spanner provides a stable and repeatable anti-rotation interface, helping reduce the risk of damage to mount cores, threads, and protective coatings during avionics maintenance procedures.
The spanner head is engineered with a pin size and arc geometry matched to the mount’s drill-rod hole diameter, ensuring proper engagement and safe installation.
Key Features
• Designed specifically for avionics isolation mounts with drill-rod hole cores• Prevents core spin during torque installation• Helps protect mount threads, coatings, and core holes• Enables repeatable torque application during installation• Allows 180° rotation for quick removal and installation• Precision matched to the mount core geometry
Compatible Mount Series
The 5675-64 spanner is designed for use with the following isolation mount families:
T64
TM64
UTM64
1769 Series
50764 Series
These mounts are commonly used in aircraft avionics tray installations and LRU mounting systems.
Typical Applications
• Aircraft avionics tray installations• LRU mounting systems• Isolation mount installation and removal• Aircraft maintenance, repair, and overhaul (MRO)• Avionics equipment servicing
Specifications
Tool Model: 5675-64Mount Compatibility: T64, TM64, UTM64, 1769, 50764Application: Avionics isolation mount installation and removalManufacturer: Molding Technologies
Available Mount Sizes
This spanner is part of the 5675 T-Mount Spanner Series, which includes tools for multiple mount sizes including:
5675-10
5675-11
5675-12
5675-22
5675-44
5675-94
Isolation Mount Installation Tool for T94 / HTC Mounts
The 5675-94 T-Mount Spanner Wrench is a precision tool designed for installing and removing avionics isolation mounts that utilize drill-rod hole core designs. This mount-specific spanner allows technicians to securely hold the mount core while applying torque, preventing core spin during installation or removal.
Unlike traditional drill-rod methods, the 5675-94 spanner provides a stable and repeatable anti-rotation interface, helping reduce the risk of damage to mount cores, threads, and protective coatings during avionics maintenance procedures.
The spanner head is engineered with a pin size and arc geometry matched to the mount’s drill-rod hole diameter, ensuring proper engagement and safe installation.
Key Features
• Designed specifically for avionics isolation mounts with drill-rod hole cores• Prevents core spin during torque installation• Helps protect mount threads, coatings, and core holes• Enables repeatable torque application during installation• Allows 180° rotation for quick removal and installation• Precision matched to the mount core geometry
Compatible Mount Series
The 5675-94 spanner is designed for use with the following isolation mount families:
T94
HTC
These mounts are commonly used in aircraft avionics tray installations and LRU mounting systems.
Typical Applications
• Aircraft avionics tray installations• LRU mounting systems• Isolation mount installation and removal• Aircraft maintenance, repair, and overhaul (MRO)• Avionics equipment servicing
Specifications
Tool Model: 5675-94Mount Compatibility: T94, HTCApplication: Avionics isolation mount installation and removalManufacturer: Molding Technologies
Available Mount Sizes
This spanner is part of the 5675 T-Mount Spanner Series, which includes tools for multiple mount sizes including:
5675-10
5675-11
5675-12
5675-22
5675-44
5675-64
9 Piece Insert Bit Assortment with Magnetic Bit Holder
The Apex BC9-C BitCase™ Aviation Bit Set is a compact professional assortment designed for technicians working with aerospace and specialty fasteners. This relaunch of the classic Apex BitCase™ kit provides a carefully selected range of Torq-Set®, Phillips®, and Tri-Wing® insert bits commonly encountered in aircraft maintenance and precision mechanical applications.
Each kit includes nine high-quality Apex insert bits and a magnetic 1/4" hex bit holder, packaged in a durable portable BitCase™ for convenient storage and quick access in the shop or on the flight line.
Manufactured to Apex industrial standards, these bits deliver precise fit, reduced cam-out, and long service life, making them trusted tools for professional technicians.
Kit Contents
Model: BC9-CDrive Type: 1/4" Hex Insert BitsTotal Pieces: 10 (9 bits + magnetic holder)
Torq-Set® Bits
APEX 212-3 — Torq-Set® #3
APEX 212-4 — Torq-Set® #4
APEX 212-5 — Torq-Set® #5
APEX 212-6 — Torq-Set® #6
APEX 212-8 — Torq-Set® #8
APEX 212-10 — Torq-Set® #10
Phillips® Limited Clearance Bits
APEX 446-1X — Phillips #1 Limited Clearance
APEX 440-2X — Phillips #2 Limited Clearance
Tri-Wing® Bit
APEX TWD-4-ACR — Tri-Wing® #4 ACR®
Bit Holder
APEX M-490-2 Magnetic Bit Holder – 1/4" Hex Drive
Features
✔ Professional Apex industrial-grade insert bits✔ Torq-Set®, Tri-Wing®, and Phillips® coverage for aerospace fasteners✔ Magnetic bit holder included for secure bit retention✔ Durable BitCase™ storage case for protection and organization✔ Compact kit ideal for tool control programs and field service
Applications
Aircraft maintenance and repair
Aerospace fasteners and avionics hardware
Precision mechanical service
Aviation tool kits and flight-line maintenance
Industrial maintenance environments
Specifications
Specification
Details
Model
BC9-C
Bit Drive
1/4" Hex Insert
Total Pieces
10
Bit Styles
Torq-Set®, Phillips®, Tri-Wing®
Bit Holder
Apex M-490-2 Magnetic Holder
Case Type
Apex BitCase™ storage case
Why Technicians Choose Apex
Apex insert bits are trusted across aerospace, defense, and industrial maintenance environments for their precision manufacturing and durability. The BC9-C kit provides a practical selection of specialty fastener bits in a compact case designed for professional tool control systems.
The AT_ALUM_JIC_KIT is a professional-grade assortment of threaded aluminum protective caps and plugs designed for 37° JIC / AN aircraft flare fittings. This kit allows aviation technicians to quickly protect both male and female hydraulic, fuel, and pneumatic fittings during maintenance, overhaul, shipping, or storage.
The kit includes NAS835 protective caps and NAS818 protective plugs, covering the most commonly used aircraft fitting thread sizes. Each component is anodized yellow for maximum FOD visibility, allowing maintenance personnel to easily identify installed protective hardware and prevent foreign object debris from entering critical aircraft systems.
For compatibility with certain legacy components, the NAS835-2 caps are supplied in natural aluminum finish, while all remaining components are finished in high-visibility anodized yellow.
The AT_ALUM_JIC_KIT is ideal for aviation maintenance shops, overhaul facilities, and field service teams that require a reliable and organized solution for protecting open aircraft fluid system fittings.
Key Features
✔ High-visibility yellow anodized aluminum for FOD detection✔ Protects male and female 37° JIC / AN flare fittings✔ Includes NAS835 protective caps and NAS818 protective plugs✔ Designed for aircraft hydraulic, fuel, and pneumatic systems✔ Helps maintain tool control and contamination prevention✔ Durable aluminum construction✔ Organized assortment for quick technician access
Kit Contents
Protective Caps – NAS835 Series
Used for male flare fittings
Part Number
Thread Size
Quantity
NAS835-2 (Natural Finish)
5/16-24
15
NAS835-3
3/8-24
15
NAS835-4
7/16-20
15
NAS835-5
1/2-20
15
NAS835-6
9/16-18
10
ASC-7
5/8-18
8
NAS835-8
3/4-16
5
NAS835-10
7/8-14
4
Protective Plugs – NAS818 / NAS836 Series
Used for female flare fittings
Part Number
Thread Size
Quantity
NAS818-3
3/8-24
10
NAS818-4
7/16-20
10
NAS818-5
1/2-20
8
NAS818-6
9/16-18
6
ASP-7
5/8-18
5
NAS818-8
3/4-16
4
NAS818-10
7/8-14
2
Additional Components
Storage location included for customer expansion:
D54-017-01 spare storage position
Applications
The AT_ALUM_JIC_KIT is commonly used in:
Aircraft hydraulic systems
Fuel system tubing
Pneumatic lines
Engine accessory components
Aircraft maintenance and overhaul operations
These caps and plugs help prevent contamination and protect critical sealing surfaces during transport, servicing, and storage.
Specifications
Kit Number: AT_ALUM_JIC_KITMaterial: AluminumFinish: Yellow anodized (NAS835-2 natural aluminum)Fitting Type: 37° JIC / AN flare fittingsStandards: NAS835, NAS818, NAS836
The AT-M-24 Metric Cap and Plug Kit is a comprehensive assortment of threaded protective caps and plugs designed to protect metric threaded fittings during maintenance, overhaul, shipping, and storage.
This kit was compiled to support FOD prevention programs and mechanic workstation efficiency, allowing technicians to quickly protect exposed threads and open ports during service procedures. By sealing off threaded openings, the AT-M-24 kit helps prevent dirt, dust, and contaminants from entering sensitive systems during maintenance operations.
Containing 215 total caps and plugs across 24 common metric thread sizes, this kit is ideal for aviation maintenance facilities, hydraulic repair stations, industrial equipment service centers, and overhaul shops.
All caps and plugs are manufactured from durable red polypropylene (PP), providing lightweight, reusable protection while allowing for easy installation and removal during routine service operations.
The kit ships in a durable hard plastic storage case with individual compartments, helping technicians quickly locate the correct size while maintaining organized inventory control at the workstation.
Key Features
✔ 215 total protective caps and plugs✔ 24 common metric thread sizes included✔ Designed for FOD prevention and thread protection✔ Durable red polypropylene construction✔ Lightweight and reusable✔ Organized hard plastic storage case with individual compartments✔ Ideal for aviation maintenance, overhaul shops, and industrial service
Kit Contents
Metric Threaded Caps
M8 × 1.0
M10 × 1.0
M12 × 1.0
M12 × 1.5
M14 × 1.5
M16 × 1.5
M18 × 1.5
M20 × 1.5
M22 × 1.5
M24 × 1.5
M25 × 1.5
M26 × 1.5
Metric Threaded Plugs
M8 × 1.0
M10 × 1.0
M12 × 1.0
M12 × 1.5
M14 × 1.5
M16 × 1.5
M18 × 1.5
M20 × 1.5
M22 × 1.5
M24 × 1.5
M25 × 1.5
M26 × 1.5
Specifications
Kit Number: AT-M-24Total Pieces: 215Material: Polypropylene (PP)Color: RedThread Type: MetricStorage: Hard plastic compartment storage case
Harmonized Tariff Code (HTS): 3923.50.0000
Applications
The AT-M-24 Metric Cap and Plug Kit is commonly used for:
Aircraft maintenance operations
Hydraulic system service
Industrial equipment maintenance
Engine and component overhaul
Contamination control and FOD prevention programs
The AT-SAE-16 SAE Cap and Plug Kit is a comprehensive assortment of threaded protective caps and plugs designed to protect SAE threaded fittings during maintenance, overhaul, shipping, and storage.
This kit was developed to support FOD prevention programs and mechanic workstation efficiency by providing immediate access to the most commonly used SAE thread protection sizes. By covering open ports and exposed threads, the AT-SAE-16 kit helps prevent dirt, dust, and foreign contaminants from entering sensitive components during service operations.
Containing 330 total caps and plugs across 16 common SAE thread sizes, this kit is ideal for aviation maintenance facilities, hydraulic repair stations, engine overhaul shops, and industrial service teams.
All caps and plugs are manufactured from durable red LDPE, offering lightweight protection while remaining easy to install and remove during routine maintenance procedures.
The kit ships in a durable hard plastic storage case with individual compartments, allowing technicians to quickly identify the correct size and maintain organized inventory control.
Key Features
✔ 330 total protective caps and plugs✔ 16 common SAE thread sizes included✔ Designed for FOD prevention and thread protection✔ Durable red LDPE construction✔ Lightweight and reusable✔ Organized hard plastic storage case with individual compartments✔ Ideal for aviation maintenance, overhaul shops, and hydraulic service
Kit Contents
SAE Threaded Plugs
5/16-24
3/8-24
7/16-20
1/2-20
9/16-18
5/8-18
3/4-16
7/8-14
SAE Threaded Caps
1/4-36
3/8-24
7/16-20
1/2-20
9/16-18
5/8-18
3/4-16
7/8-14
Specifications
Kit Number: AT-SAE-16Total Pieces: 330Material: LDPE (Low Density Polyethylene)Color: RedThread Type: SAEStorage: Hard plastic compartment storage box
Harmonized Tariff Code (HTS): 3923.50.0000
Applications
The AT-SAE-16 kit is commonly used for:
Aircraft maintenance operations
Hydraulic system service
Engine overhaul facilities
Industrial equipment maintenance
Contamination and FOD prevention program
This spark plug gap setting tool is designed for closing gaps on spark plugs equipped with multiple ground electrodes such as Champion aircraft types M41E, REM40E, REB37E, and Champion Industrial plugs such as W80N, W85N, D14N, etc. The tool can be clamped on a bench, held in a vise, or used as a hand tool.
This package includes an 18mm spark plug adapter (Part No. GT-204), a GT-208 adapter specifically for regapping REM37BY plugs, and a CT-450 gap gauge.
Specifications:
Height: Approx. 7.5 in (19.5 cm)Shipping Weight: 1.5 lbs (0.68 kg)Packaging: Individually packed
Champion CT-450 Retractable Spark Plug Gap Gauge
The Champion CT-450 is a professional-grade, retractable wire gap gauge specifically designed for checking electrode gaps on massive-electrode aviation spark plugs. It is widely used by aviation mechanics to ensure that spark plug gaps meet precise "Go" and "No-Go" tolerances for optimal engine performance.
Key Features and Design
Retractable Mechanism: Features a high-impact red plastic case that houses retractable wire sets to protect the precision measuring surfaces when not in use.
Go/No-Go Wire Sets: Contains four sets of accurate wire gauges categorized into two primary nominal sizes:0.016" Nominal: Two sets covering .015 (Go) to .019 (No-Go).0.019" Nominal: Two sets covering .018 (Go) to .022 (No-Go).
Compact Dimensions: The tool is approximately 3.5 inches (8.9 cm) long and weighs 1.25 oz (35g).
CT456A Inspection Light – Champion Aerospace
Professional-grade inspection tool for precision diagnostics.
🔧 Engineered for Rapid, Reliable Inspections
The CT456A Inspection Light by Champion Aerospace is a compact, high-powered tool built to inspect spark plugs, ignitors, and other small components with unmatched clarity. Whether you're in aviation, automotive, machining, or collecting, this tool delivers the detail you need to spot wear, damage, or debris fast.
🔍 Precision Optics: See What Others Miss
3X Fixed Lens: Integrated into the tool for wide-field inspection.
10X Removable Lens: Pairs with the 3X for powerful close-up magnification.
Precision-Ground Glass: Delivers clear, distortion-free visuals.
Optimized Focal Lengths: Designed for use directly at the spark plug input to maximize sharpness and clarity.
⚙️ Built for Performance
Tool Head Material: PA66 / Nylon 66 – high strength, heat- and chemical-resistant, low water absorption.
Flashlight: LUXPRO V2 (early models) and V3 (later models) – aircraft-grade aluminum for durability.
Lens: Crystal-clear precision ground glass.
Light Diffuser: Internal polycarbonate diffuser for soft, even lighting.
✅ Key Inspection Capabilities
Examine fuel deposits along the insulator nose
Identify incomplete or uneven cleaning
Detect cracks, chips, and wear on insulators
Check sparking surface condition
Determine when spark plugs need replacement
🌍 Not Just for Aviation
This tool is perfect for:
Automotive Techs – Spark plug diagnostics
Machinists – Detecting micro burrs or detail work during in-process inspections
Hobbyists – TCG collectors, model builders, miniatures
Quality Control – Small parts and detail inspection
💡 Note: As magnification increases, field of view decreases. The CT456A's calculated focal lengths ensure optimal clarity at high magnification (10X). 10x field of depth decreased length of bore inspection.
🔒 Your Professional Inspection Solution
Built to last. Engineered for clarity. Trusted by pros.Add the CT456A Inspection Light to your toolkit today and inspect with confidence.
Upper Collet Bushing specifically designed for use with the Champion Aerospace CT-2500A Gap Setting Tool. This tool is a precision instrument used by aviation mechanics to adjust the electrode gaps on massive-electrode aircraft spark plugs
Replacement Part: It is an official spare part for the Champion Aerospace CT-2500A Gap Setting Tool, which is used for simultaneous adjustment of two opposite prongs without removing the spacing gauge.
The Champion CT458-12 is a replacement Collet Adjustment Bushing designed for use with the Champion Aerospace CT-2500A Gap Setting Tool.
It is an official spare part for the Champion Aerospace CT-2500A Gap Setting Tool, which is used for simultaneous adjustment of two opposite prongs without removing the spacing gauge. It is one of several specific bushings within tool assembly, working alongside the CT458-10 Upper Collet Bushing and the CT458-11 Centering Bushing.
Designed for use with the Model 2500A precision gap-setting tool, the GT1-17J spacing gauge is used specifically to measure and set a constant 0.018-inch (0.46 mm) gap on massive-electrode aircraft spark plugs. It is an essential accessory for maintaining Champion massive-electrode spark plugs.
Designed for use with the Model 2500A precision gap-setting tool, the GT1-17L spacing gauge (.015–.019" / .40–.5 mm) is an essential accessory for maintaining Champion massive-electrode spark plugs.
*GT-1-27 handle not included*
The Champion Aerospace GT1-27 Spacing Gauge Handle Assembly is a specialized tool designed to simplify the installation and maintenance of aircraft spark plugs.
This 9.5-inch handle assembly works in tandem with precision gap-setting tools to ensure that both new and cleaned spark plugs maintain the optimal spacing required for reliable engine performance. It is specifically engineered to fit the Champion Aerospace Model 2500A Precision Gap Setting Tool, which is the standard equipment for gapping Champion massive-electrode spark plugs.
Key Specifications
Length: 9.5 inches (approx. 24.1 cm).Weight: Approximately 0.26 lbs.Compatibility: Designed for use with the Champion Aerospace CT-2500A (Model 2500A) Gap Setting Tool.Application: Ideal for simultaneous adjustment of two opposite prongs without the need to remove the spacing gauge from the assembly.
Can be used in conjunction with;
GT-1-17L Spacing Gauge: Provides measurements for gaps between .015" and .019" (0.40–0.50 mm).
GT-1-17J Spacing Gauge: Designed for a fixed .018"
Professional 100% Cotton Polishing Cloths – Recommended for KPC Products
KPC K-200-C Series 100% Cotton Polishing Cloths are designed for use with KPC specialty cleaning and polishing products, delivering safe, consistent results when cleaning and buffing delicate surfaces.
Soft natural cotton cloths provide smooth surface contact, making them ideal for polishing plastics and acrylic aircraft windows. Both commercial and military specifications qualification of cleaners and polishes for "transparent plastic materials" are only allowed to use cotton polishing cloths. They also perform well on leather and vinyl upholstery, as well as other accessories. Many KPC products specifically recommend 100% cotton polishing cloths to achieve the best finish and avoid surface scratching.
These professional polishing cloths are commonly used for aviation detailing, automotive detailing, marine applications, and accessory cleaning, where maintaining a clear, streak-free finish is critical.
Ideal Applications
Aircraft plastic windows and canopies
Acrylic windshields and instrument lenses
Vinyl upholstery and interior panels
Plastic surfaces and clear protective shields
Automotive and marine detailing - Leather and vinyl upholstery
General polishing and buffing applications
Motorcycle Helmets, Visors, and hard side-saddlebags
Why Use 100% Cotton for Polishing
Soft natural fiber safe for delicate surfaces
Helps reduce risk of micro-scratches
Provides smooth buffing action
Ideal for use with polishing compounds and cleaners
Recommended for use with KPC specialty chemical products
Many KPC surface cleaners and polishes recommend wiping and buffing with clean cotton polishing cloths to achieve the best results and finish quality.
Available KPC Cloth Part Numbers
K-200-C2 – 2 pack cotton polishing cloths
K-200-C10 – 10 pack cotton polishing cloths
K-200-C100 – 100 pack cotton polishing cloths
These cloths are designed to complement KPC’s line of aviation and specialty cleaning products used on plastics, vinyl, leather, and rubber surfaces.
Trusted with KPC Specialty Chemical Products
KPC has been manufacturing specialty cleaning and maintenance products since 1951, serving aviation, automotive, marine, and industrial markets with material-safe cleaning solutions.
When used with KPC cleaners and polishes, the K-200 Series cotton cloths help deliver the smooth, streak-free finish professionals expect.
Key Features
100% cotton polishing cloths
Soft, lint-resistant material
Ideal for buffing and polishing
Safe for plastics, acrylic, vinyl, and painted surfaces
Recommended for use with KPC cleaning and polishing products
Available in convenient multi-pack quantities
Professional Cleaning for Plastic, Vinyl, Rubber & Leather
Whether you're on land, at sea, or in the air, the KPC Complete Detailing Kit gives you everything needed to clean, restore, and protect your most common interior and exterior surfaces.
Instead of relying on a one-size-fits-all cleaner, this kit includes four specialized KPC formulas, each designed specifically for a different material. The result is a deeper clean, better surface protection, and a professional finish every time.
Perfect for automotive detailing, aircraft interiors, marine applications, and general equipment care, the KPC system helps bring surfaces back to life while maintaining their original appearance.
To finish the job properly, the kit also includes 10 premium polishing cloths, ideal for applying and buffing the cleaners to achieve a smooth, streak-free finish.
Why You'll Love It
✔ Four specialized cleaners for different surfaces✔ Restores and protects plastics, vinyl, rubber, and leather✔ Professional detailing results without harsh chemicals✔ Convenient all-in-one kit for multiple applications✔ Includes premium polishing cloths for smooth buffing
What's Included
• 8 oz KPC Plastic Cleaner – Restores clarity and removes surface buildup• 8 oz KPC Vinyl Cleaner – Safely cleans and refreshes vinyl surfaces• 8 oz KPC Rubber Cleaner – Revives rubber components and trim• 8 oz KPC Leather Cleaner – Gently cleans and maintains leather surfaces• 10 Pack of Polishing Cloths – Ideal for applying and buffing cleaners
Perfect For
• Automotive detailing• Aircraft interior cleaning• Marine and boat care• Rubber trim restoration• Vinyl upholstery cleaning• Leather maintenance
Professional Detailing Made Simple
With four specialized cleaners and premium polishing cloths included, the KPC Complete Detailing Kit gives you the tools needed to properly clean and protect multiple surfaces without switching between products.
Clean. Protect. Preserve. With KPC professional detailing solutions.
